GE JD630 Owner's Manual page 25

Electric slide-in and drop-in ranges
Hide thumbs Also See for JD630:
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting Tips ... Before you call for service
Problem
Sometimes the oven
takes longer to preheat
to the same temperature
Display flashes
Unable to get the display
to show "SF"
Control signals after
entering cooking time or
start time
Oven racks are difficult
to slide
Drawer does not slide
smoothly or drags
Steam from the vent
49-2000995 Rev. 3
Possible Cause
Cookware or food in oven.
Number of racks in oven.
Power failure.
Oven control pads were not
touched properly.
You forgot to enter a bake
temperature or cleaning time.
The shiny, silver-colored racks
were cleaned in a self-clean cycle.
The drawer is out of alignment.
Drawer is over-loaded or load is
unbalanced.
When using the ovens, it is
normal to see steam coming out
of the oven vents. As the number
of racks or amount of food being
cooked increases, the amount of
visible steam will increase.
What To Do
The cookware or food in the oven will cause the oven to take
longer to preheat. Remove items to reduce preheat time.
Adding more racks to the oven will cause the oven to take
longer to preheat. Remove some racks.
Reset the clock.
The Broil Hi/Lo and Bake pads must be touched at the same
time and held for 3 seconds.
Touch the Bake pad and desired temperature or the Self
Clean pad and desired clean time.
Apply a small amount of vegetable oil to a paper towel and
wipe the edges of the oven racks with the paper towel. Do not
spray with Pam
®
or other lubricant sprays.
Fully extend the drawer and push it all the way in See the
Care and cleaning of the range section.
Reduce weight. Redistribute drawer contents.
This is normal.
25

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Js630Jd630dtbbJd630stss

Table of Contents