Advertisement
Note: Holes may need to be drilled in the vehicle
chassis to mount the Horns, Air Compressor
and 12V Relay. Make sure no electrical wires
or cables or any other obstructions or vehicle
components are in the way of the drilling path.
3. Mount the Horns, Air Compressor and 12V Relay to
the vehicle's chassis using the supplied Mounting
Brackets, Nuts and Bolts. Point the Horns forward
and slightly down for maximum efficiency.
4. Tighten Nuts to secure the Horns, Air Compressor
and 12V Relay to the mounting location.
Parts List and Diagram
Part
Description
1
Air Compressor
2
High-Tone Air Horn
3
Low-Tone Air Horn
4
12V Relay
5
Air Tube
6
Mounting Bracket
7
Nut
8
Bolt
9
Nut
10
Bolt
11
3-Way Tube Adapter
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts. Specify UPC 193175446886 when ordering parts.
Item 58808
Negative Ground Wiring Diagram
Battery
3-Way Tube
Adapter
Air Compressor
Qty
For technical questions, please call 1-888-866-5797.
5. Connect Air Tube to Air Compressor, 3-Way
Tube Adapter and then to both Horns.
6. Make connections to the Horns, Air Compressor
and 12V Relay as shown on the Wiring Diagram
using terminal connectors (not included) on all
connections. Pay attention to polarity. For negative
ground systems (most vehicles). For positive ground
systems, have a qualified mechanic install the horn.
Install a 15 amp fuse (not included) inline on
the power supply wire of this item. Using no
fuse, or using an incorrect fuse can cause an
electrical fire.
12V Relay
15 A Fuse
(not included)
Air Tube
3
1
1
1
1
1
2
4
4
4
1
11
1
1
6
7
2
1
10
8
9
5
Page 3
Advertisement
