Brother MFC-J3530DW Product Safety Manual page 4

DO NOT place the product near chemicals or in a place where chemicals could be spilled on it.
Should chemicals come into contact with the product, there may be a risk of fire or electrical
shock.
In particular, organic solvents or liquids such as benzene, paint thinner, polish remover, or
deodoriser may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or
electrical shock. These or other chemicals may also cause the product to malfunction or become
discoloured.
CAUTION
Put your product on a flat, stable surface that is free from shocks and vibrations, such as a desk.
Put the product near a telephone socket and a standard grounded electrical socket.
DO NOT place heavy objects on the product. DO NOT place this product on an unstable cart,
stand, or table, particularly if children are expected to be near the product. The product is heavy
and may fall, causing injury to you or others, and serious damage to the product. For the
products with scanning functionality, there is an added risk of injury if the scanner glass should
break.
Avoid placing your product in a high-traffic area. If you must place it in a high-traffic area, ensure
that the product is in a safe location where it cannot be accidentally knocked-over, which could
cause injury to you and serious damage to the product.
IMPORTANT
• DO NOT put objects on top of the product. Doing so could increase the risk of overheating
should the product malfunction.
• DO NOT place anything in front of the product that will block received faxes or printed pages.
DO NOT place anything in the path of received faxes or printed pages.
• DO NOT place your product next to sources of interference, such as speakers or the base units
of non-Brother cordless telephones. Doing so may interfere with the operation of the product's
electronic components.
• DO NOT place the product on any tilted/slanted surface. DO NOT tip the product after the ink
cartridges are installed. Doing so may cause ink spillage and internal damage to the product.
4