Removing Blower And Heat-Sink Assembly; Prerequisites; Procedure - Dell XPS 8920 Service Manual

Removing blower and heat-sink
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
WARNING: The heat sink may become hot during normal operation. Allow
sufficient time for the heat sink to cool before you touch it.
CAUTION: For maximum cooling of the processor, do not touch the heat
transfer areas on the heat sink. The oils in your skin can reduce the heat
transfer capability of the thermal grease.

Prerequisites

1 Remove the right-side
2 Follow the procedure from step 1 to step 2 in

Procedure

1 Remove the screws that secure the blower to the heat-sink assembly.
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
"Removing the power-supply
Before
unit".
89