Amazon B081244SRH Manual page 7

Wall-mount electric led multicolor 3d heating fireplace with remote control
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
» Do not run cord under
carpeting� Do not cover cord
with throw rugs, runners or
similar coverings� Do not
route cord under furniture or
appliances� Arrange cord away
from traffic area and where it will
not be tripped over�
» Never use with an extension
cord� Connect the appliance to
a dedicated socket outlet�
» Do not insert or allow foreign
objects to enter any ventilation
or exhaust opening as this may
cause an electric shock or fire,
or damage the appliance�
» This appliance has hot and
arcing or sparking parts inside�
Do not use it in areas where
gasoline, paint or flammable
liquids are used or stored�
» Install and use this appliance
only as described in this
manual� Any other use
not recommended by the
manufacturer may cause fire,
electric shock or injury to
persons�
» If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard�
» Connect to properly grounded
outlets only�
» This product contains no user
serviceable parts and requires
little maintenance� Leave any
servicing or repairs to qualified
personnel only�
» The LEDs contained in this
product are non-replaceable�
» For UK only: All the electrical
installations must be done
according to BS 7671�
For wall installation A:
» Always unplug the appliance
when not in use�
» To disconnect the appliance,
switch controls to off, then
remove plug from outlet�
» Connect the power plug to an
easily reachable socket outlet so
that in case of an emergency,
the appliance can be unplugged
immediately� Pull the power
plug out of the socket outlet
to completely disconnect the
appliance from the voltage�
For recessed installation B:
» To completely disconnect the
appliance, set the wall switch to
off�
EN
7

Advertisement

Table of Contents
loading

Table of Contents