Table of Contents
Advertisement
Installation
How to adjust the height of the refrigerator door
If any door is lower than the other, you may adjust them as follows:
• Prior to adjustment, please check whether the refrigerator has been leveled.
Caution
• To avoid personal injury, please be careful to insert or extract the snap ring.
• Please keep the snap ring and wrench out of reach of children to ensure that
the children will not play with them or put them in the mouth.
20 English
Method (I) as shown in the figure:
Insert the snap ring 1 between the
door and the hinge with a pincer to
adjust the height difference of the
refrigerator doors.
①
After checking the height difference,
please select a snap ring
which has a proper thickness.
Important information: You may only
②
insert one snap ring. Insertion of two
or more snap rings may cause the
snap ring to slide or produce abrasion
sound. Lift the lower door upward
and insert the snap ring into the gas
between the door and the hinge.
Method (II) as shown in the figure
(applied to RF50*58** Series):
Insert the allen wrench 2 of 4 mm into
the hold at the lower part of the hinge,
and then rotate the wrench clockwise
(to lower the door) or anticlockwise
(to raise the door).
Important information:
• Prior to rotating the wrench, please
take the articles on the bottle shelf
of the door out, then the wrench will
be easily turned.
Advertisement
Table of Contents
