Setting A Delayed Start; Quick 30; Keep Warm - Panasonic NN-SD67NS Manual

Setting a Delayed
Start
1
The start time can be delayed
to start cooking at a later time.
To do this, first press Timer .
2
Set the desired delay time by
turning dial (up to 99
minutes, 99 seconds) .
3
Press Power Level until the
desired power level appears
in the display. PL10 is the
highest and PL1 is the lowest.
Operation (continued)
4
Set Cooking Time by turning dial
(see previous page for maximum
times).
5
Press Start; the delay time will
count down, then cooking will
begin. At the end of cooking,
five beeps will sound.
NOTES:
1. When each stage finishes,
the oven will beep twice. At
the end of the program, the
oven will beep five times.
2. If the oven door is opened
during Stand Time, Kitchen
Timer or Delay Time, the
time on the display will
continue to count down.
3. Stand Time and Delay start
cannot be programmed
before any automatic
function. This is to prevent
the starting temperature of
food from rising.

Quick 30

(Set or add cooking time in
30 seconds increments)
1
Press Quick 30 until the
desired cooking time (up to
5 minutes) appears in the
display. Power Level is pre-set
at PL10.
2
Press Start; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps will
sound.
NOTES:
1. If desired, you can use
other power levels. Select
desired power level before
pressing Quick 30.
2. After setting the time by
Quick 30 button, you
cannot use the Dial.
3. Quick 30 button can also
be used to add more time
during manual cooking.
11

Keep Warm

(Will keep food warm for up to
30 minutes after cooking)
1
Press Keep Warm.
2
Set warming time by turning
dial,up to 30 minutes. This
example shows two minutes.
At the end of warming, five
beeps will sound.
3
Press Start; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps will
sound.
NOTES:
Keep Warm can be set as the
final stage after cook time has
been manually entered. It
cannot be used with sensor or
auto features.