Download Print this page

Memory Mode; Specifications; Precautions - Oregon Scientific PE603 User Manual

Pedometer watch
Hide thumbs Also See for PE603:

Advertisement

Alarm
Date
Time
Weight
Beep ON / OFF
To set setting modes:
1. Press and hold SET to enter new settings.
2. Press MEM to increase values and DISP to lower
values.
3. Press SET to confi rm.

MEMORY MODE

The pedometer watch can store your steps taken for up
to 7 days. At the end of each day the pedometer watch
will automatically record steps taken.
To view records:
Press MEM to enter memory mode.
Press MEM again to view steps taken, in reverse
order, 7-1 days memory before present day.
Press SET to view steps taken, in successive order,
1-7 days memory before present day.
To erase all records:
In memory mode, press and hold SET until a confi rmation
sound is heard.
PE603_EN_M_REV1.indd 5

SPECIFICATIONS

Real time clock
Power
Operating
temperature
Storage temperature
Water resistant

PRECAUTIONS

To ensure you use your product correctly and safely,
read these warnings and the entire user manual before
using the product:
Use a soft, slightly moistened cloth. Do not use
abrasive or corrosive cleaning agents, as these may
cause damage. Use luke warm water and mild soap
to clean the watch and chest belt thoroughly after
each training session. Never use the products in hot
water or store them when wet.
Do not bend or stretch the transmitter part of the chest
belt.
Do not subject the product to excessive force, shock,
dust, temperature changes, or humidity. Never
5
12/24 hour with hour /
minute / second
1 x C R 2 0 3 2 l i t h i u m
battery
0°C to 40°C
(32°F to 104°F)
-20°C to 60°C (-4°F to
140°F)
Up to 50 meters (164 feet)
Up to 50 meters (164 feet)
Up to 50 meters (164 feet)
without pressing keys
without pressing keys
8/9/07 5:19:25 AM

Advertisement

loading