en-us Basic Operation
13.10 Terminating the
wash cycle
To end a cycle early or to switch
from one that has already started,
you will need to cancel it first.
Press
▶
4 seconds.
a As soon as the displays are off,
the display shows "0h:01m"
and the residual water is
pumped out.
a The cycle is cancelled and
ends after approx. 1 minute.
13.11 Switching off the
appliance
CAUTION
To avoid risk of injury, always use
caution when opening the door
during or following a wash cycle
as hot water or steam may es-
cape.
Do not fully open the door until
▶
water noises have stopped and
steam has subsided.
Please note the information on
1.
Preventing Material Damage
→ Page 9 .
Press On/Off.
2.
32
for approx.