Touch Pen - Sharp PN-LC862 Operation Manual

Pen tip (thin)
The following pre-installed software recognizes the side of the touch pen that is touching the screen, enabling the two sides to
be used as different pens.
• Whiteboard
For details on how to use the touch pen in Whiteboard, refer to "Whiteboard" (see page 31).
TIPS
• When touching with the pen tip (thin), if the touch pen is tilted too much, it may be recognized as the pen tip (thick).
• In case of an overlay board (see page 29) and Whiteboard (see page 31), multiple touch pens can be used simultaneously. In
other use cases, multiple touch pens cannot be used simultaneously.
• When multiple touch pens are used, lines may break.
- When touched simultaneously.
- When touch pens are moved near each other.
• If the pen tip becomes worn or damaged, replace the touch pen. To purchase a new touch pen, consult your dealer.
The supplied touch pen is attached to the marked positions on this monitor.
TIPS
• Do not attach anything other than the supplied touch pen.
• The touch pen has a built-in magnet. Do not move close watch or magnetic card to it.

Touch Pen

Pen tip (thick)
19
E