Gigabyte H510M S2H V3 User Manual page 7

Storage Interface Š
USB
Internal
Connectors
Back Panel
Connectors
I/O Controller
Hardware
Monitor
j Only for H510M S2H V3.
k Only for H510M H V2.
Chipset:
- 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 3.0 x4/x2
SSD support)
- 4 x SATA 6Gb/s connectors
RAID 0, RAID 1, RAID5, and RAID 10 support for NVMe SSD storage devices
Š
RAID 0, RAID 1, RAID5, and RAID 10 support for SATA storage devices
Š
Chipset:
Š
- 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
- 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Š
1 x CPU fan header
Š
1 x system fan header
Š
1 x RGB LED strip header
Š
1 x M.2 Socket 3 connector
Š
4 x SATA 6Gb/s connectors
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x USB 3.2 Gen 1 header
Š
1 x USB 2.0/1.1 header
Š
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
Š
2.0 module only)
1 x serial port header
Š
1 x Clear CMOS jumper
Š
1 x PS/2 keyboard/mouse port
Š
1 x D-Sub port
Š
1 x DisplayPort j
Š
1 x HDMI port jk
Š
2 x USB 3.2 Gen 1 ports
Š
4 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
3 x audio jacks
Š
iTE I/O Controller Chip
®
Š
Voltage detection
Š
Temperature detection
Š
Fan speed detection
Š
Fan fail warning
Š
Fan speed control
Š
* Whether the fan speed control function is supported will depend on the fan you install.
- 7 -