Installing The Awning - Dometic 878HU-WH Installation And Operating Manual

Dometic8700
Hardware
(fig. 3)
Height range
Main arm (1) length
Adjustable arm (2)
length
Main rafter (3)
length
Secondary rafter (4)
length
6

Installing the awning

6.1 Notes on the installation
!
WARNING! Failure to obey these warnings could result in death
or serious injury.
Fire hazard/Electrocution hazard
• Make sure there are no obstacles (wires, pipes, etc.) on the RV's roof
and inside the RV's walls.
• Shut off gas supply to the RV.
• Disconnect AC power from the RV, and disconnect the positive
+12 Vg terminal from the supply battery(s) before drilling or cutting
into the RV.
Impact or crush hazard
• The device may become unstable and could detach, bend, or col-
lapse. Make sure mounting surface on the RV is flat, has solid structural
backing where fasteners penetrate the surface, and will safely and
securely support the product.
• Find a solid structure in the RV wall for support of top mounting
brackets.
EN
878HT-WH
878HT-BK
(Tall – Black or
White)
1892 mm – 2235 mm 1626 mm – 1930 mm 1499 mm – 1676 mm
1854 mm
1448 mm
1676 mm
826 mm
878HS-WH
878HS-BK
(Standard – Black
or White)
1549 mm
1448 mm
1372 mm
1130 mm
Installing the awning
878HU-WH
(Ultra short White)
1385 mm
1288 mm
1244 mm
1130 mm
7