AMD FirePro W7000 User Manual page 20

14 Using the Control Center Software
Table 4–1 Control Center Access Routes in Windows®
Access Route
Windows Desktop
Windows Start Menu
Windows Notification Area
Desktop Shortcut
To start the application in Linux®, type the command amdcccle in the terminal
window.
To start the application with superuser privileges, do any of the following:
Log on as a superuser before running the command amdcccle.
•
Run the command sudo amdcccle and provide the superuser password when
•
prompted.
Run the command amdxdg-su -c amdcccle and provide the superuser
•
password when prompted.
Note: Certain Control Center settings can only be changed with superuser privileges.
AMD FirePro™ W7000 Graphics Accelerator
Instructions
1. Right-click anywhere on the desktop.
2. From the shortcut menu that appears, click the Control Center option.
1. Click Start on the Windows task bar.
2. Click All Programs followed by the Control Center option.
1. Right-click the Control Center icon in the Windows Notification Area.
2. From the shortcut menu, click the Control Center option.
If you chose to create a desktop shortcut to the Control Center application
during the driver installation, double-click the shortcut.
© 2012 Advanced Micro Devices Inc.