Password Protection For Booting Of The Operating System; Password Protection For The Hard Disk - Fujitsu LIFEBOOK S936 Operating Manual

Removing passwords
To remove a password (without setting a new password) perform the following steps:
User password Supervisorpassword Password
► Start the BIOS Setup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new password by the Enter New Password prompt.
► Press the Enter key twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
The notebook will now reboot with the password removed.
Removing the supervisor password simultaneously deactivates the user password.

Password protection for booting of the operating system

With the supervisor password you have set in the BIOS Setup Utility (see
section "Assigning the supervisor and user passwords", Page
also prevent starting of the operating system.
Operating system
Activating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.
► Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key
► Select the Save Changes & Exit option under Exit.
The notebook reboots. You will be prompted to enter your password (the supervisor password).
Deactivating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.
► Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. The system is no longer password-protected.

Password protection for the hard disk

Passwordprotection:
The hard disk password prevents unauthorised access to the hard disk drives
and is checked internally each time the system is booted. The prerequisite for
this is that you have assigned at least the supervisor password.
Fujitsu
Security functions
56), you can
57