Specifications
Temperature accuracy
Temperature sensor type
Operating temperature
Storage temperature
Minimum immersion depth 15 mm (0.59 in.)
Body material (standard)
Electrolyte
Storage solution
Cable connection
Dimensions
Weight (includes cable)
Warranty
Certifications
Section 3 Safety information
3.1 Intended use
The Intellical probes are intended for use by individuals who measure water quality parameters in the
laboratory. The Intellical probes do not treat or alter water.
3.2 Use of hazard information
Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation that may result in minor or moderate injury.
Indicates a situation which, if not avoided, may cause damage to the instrument. Information that
requires special emphasis.
1
Use of other storage solutions can cause permanent damage to the probe.
4 English
Details
±0.3 °C (±0.54 °F)
30 kΩ NTC thermistor
0 to 80 °C (32 to 176 °F)
5 to 40 °C (41 to 104 °F)
Epoxy
Non-refillable gel reference element, semi-liquid gel
Hach pH electrode storage solution
M12 digital output and connector
Diameter: 12 mm (0.47 in.)
Length: 175 mm (6.9 in.) total; 103 mm (4.1 in.) below head
Cable length: PHC20101: 1 m (3.3 ft); PHC20103: 3 m (9.8 ft)
PHCxxx01: ~0.4 kg (0.9 lb); PHCxxx03: ~0.45 kg (1 lb)
6 months on the probe. This warranty covers manufacturing defects,
but not improper use or wear.
CE, FCC/ISED
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
1
or 3 M KCl