D-Link DAP-2660 Quick Installation Manual page 6

Nuclias connect ac1200 dual band poe access point

Hide thumbs Also See for DAP-2660:

Solid wall or ceiling

Installation

1. Place the mounting bracket on a wall or

ceiling.

2. Mark the points where you will insert the

screws. Take out the mounting ring.

3. Drill holes in the marked points and

insert the plastic wall anchors.

4. Use the supplied screws to attach the

mounting ring to the wall.

5. Plug the Ethernet cable into the LAN

port on the access point.

6. To attach the access point to the

mounting bracket.

D-Link DAP-2660 Quick Install Guide

Table of Contents