Quick Start: Getting Up To Speed - Traxxas SLEDGE Owner's Manual

The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your model.
Look for the Quick Start
logo at the bottom of
Quick Start pages.
8 • SLEDGE

QUICK START: GETTING UP TO SPEED

The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom
corners of Quick Start pages.
1. Read the safety precautions on pages 4-5
For your own safety, understand where carelessness and misuse
could lead to personal injury.
2. Charge the battery packs • See page 12
Your model requires two identical LiPo battery packs and a
compatible battery charger (sold separately). Never use a NiMH or
NiCad charger to charge LiPo battery packs.
3. Install batteries in the transmitter • See page 12
The transmitter requires 4 AA alkaline batteries (sold separately).
4. Install battery packs in the model • See pages 13
Your model requires two fully charged LiPo battery packs
(or a single 4s LiPo battery pack using the supplied accessory
adapter) (batter(ies) not included).
5. Turn on the radio system • See page 14
Make a habit of turning the transmitter on first, and off last.
6. Check servo operation • See page 15
Make sure the steering servos are working correctly.
7. Range test the radio system • See page 15
Follow this procedure to make sure your radio system works properly
at a distance and that there is no interference from outside sources.
8. Detail your model • See page 9
Apply other decals if desired.
9. Drive your model • See page 20
Driving tips and adjustments for your model.
10. Maintaining your model • See page 26
Follow these critical steps to maintain the performance
of your model and keep it in excellent running condition.