Honda CLARITY Fuel Cell 2020 Owner's Manual page 500

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
Pressure Relief Button
498
• Greater than 25 psi (175 kPa), but less
than 36 psi (250 kPa):
Turn the air compressor on to inflate the
tire until the tire pressure reaches 36 psi
(250 kPa).
2 Inflating an Under-inflated Tire P. 499
Then drive carefully for 10 more minutes or
until you reach the nearest service station,
whichever is sooner. Do not exceed 50 mph
(80 km/h). If you have not reached a service
station, stop and check the tire pressure.
u You should repeat this procedure as long
as the air pressure is within this range.
7. Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
8. Press the pressure relief button until the
gauge returns to 0 psi (0 kPa).
9. Repackage and properly stow the kit.
1Distributing the Sealant in the Tire
WARNING
3
Do not use the compressor in garages,
warehouses or poorly ventilated places.
There is danger of lack of oxygen.