Honda CLARITY Fuel Cell 2020 Owner's Manual page 17

High Voltage Components, High Voltage Cables and High Temperature
Components
Fuel cell vehicles have high voltage components (about 500 V maximum) such as the FC stack, FCVCU, High Voltage battery, power control
unit, high voltage cables (identified by their orange covers), electric motor, and high temperature parts such as the radiator. Labels with
handling warnings are attached to these components.
12V DC/DC Converter
FCVCU b
● A/C Compressor
● A/C Heater
● Electric Motor
● Power Control Unit
Label
a Radiator Cap
High Voltage Battery
Air Pump Power Control Unit
FC Stack b
Air Pump
Radiator a
b FCVCU and FC Stack
WARNING
This vehicle has high voltage circuits and
parts. Failure to observe the following
precautions can result in burns or electric
shock.
●
Do not remove, disassemble, or replace
the high voltage parts, cables (orange) or
their connectors.
● Never touch the High Voltage battery
service plugs.
In an emergency or during maintenance or
repair, the service plugs are removed to cut
off the electric flow from the battery. These
plugs are in contact with the battery and
can cause severe electric shock if not
handled properly.
Only a qualified technician should handle
any electrical equipment. For inspection
and repair, consult an authorized Honda
Clarity Fuel Cell dealer.
15