Warning/Error/Service Call Error; Code Table - Canon imagePROGRAF iPF815 Service Manual

Chapter 8

8.2 Warning/Error/Service Call Error

8.2.1 Code Table

Code
(last 4 digits)
- Sheet printing
is selected, but
a roll is loaded.
- Media Type not
compatible with
cassette.
Check Media Type.
Stop: Stop Printing
- Regular printing
is selected, but
a roll is loaded.
Press OK,
remove the roll,
and load sheets.
- Papr Type Mismatch
-
- Papr Size Mismatch
- Cannot print
as specified.
Lift the release
lever and replace
paper with XXX
(vertical) or larger
- Sheet printing
is selected.
Press Load/Eject
and load sheets.
- Sheet printing
is selected.
- Paper Pos Wrong
- Turn on the media
take-up unit.
8-2
Panel display Panel display
(Large LCD) (Small LCD)
Media Check
Please Cancel
Cas Cannot Feed
Please Check
PaprTyp Mismatch
Paper Mismatch
PaprSiz Mismatch
Paper Pos Wrong
Explanation/Detection sequence
Paper mismatch (cut sheet)
Print data having a cut sheet print
specification has been received with media
take-up unit use being selected.
Paper mismatch (cut sheet)
Cassette pickup has been specified for
paper that does not support cassette pickup.
Paper mismatch (cut sheet)
Print data having a manual feed print
specification has been received at the
completion of roll paper pickup.
Paper mismatch (type)
(1) Mismatch following the selection of
any of the following menu choices:
- [Warning Indication] has been selected
for [Paper Mismatch Detection].
- [ON] has been selected for [Paper Error
Skip].
(2) On forced printing following a
mismatch resulting from the selection of
the following menu option:
- [Pause] has been selected for [Paper
Mismatch Detection].
Paper mismatch (both type and size)
(1) Mismatch following the selection of
any of the following menu choices:
- [Warning Indication] has been selected
for [Paper Mismatch Detection].
- [ON] has been selected for [Paper Error
Skip].
(2) On forced printing following a
mismatch resulting from the selection of
the following menu option:
- [Pause] has been selected for [Paper
Mismatch Detection].
Paper mismatch (size)
(1) Mismatch following the selection of
any of the following menu choices:
- [Warning Indication] has been selected
for [Paper Mismatch Detection].
- [ON] has been selected for [Paper Error
Skip].
(2) On forced printing following a
mismatch resulting from the selection of
the following menu option:
- [Pause] has been selected for [Paper
Mismatch Detection].
Paper mismatch (size)
When performing internal printing, paper
loaded is smaller than the size specified for
each print purpose.
[XXX]: appropriate paper size
Paper mismatch (cut sheet)
No cassette paper has been loaded when
data having a cut sheet specification is
received. (Paper type /size not determined)
Paper mismatch (cut sheet)
No cassette paper has been loaded when
data having a cut sheet specification is
received.
(Paper type /size not determined)
Invalid paper loading position
Paper is invalidly positioned on the platen.
Printing has started with the media take-up
unit setting of [Use] and with the media
take-up unit switched off.
Remedial Action
Printing on cut sheet is not functional
with a media take-up unit in use.
Check the cassette pick-up setting/
paper type.
Check the cassette pick-up setting/
paper type.
This is a warning and allows continued
printing.
This is a warning and allows continued
printing.
This is a warning and allows continued
printing.
Replace the paper with appropriate
one.
Load cut sheet.
Load cut sheet.
Switch on the media take-up unit.
*A measure for a third-party media
take-up unit that is not connected to the
main unit.
0032-0886