Points To Note During Disassembly And Assembly; List Of Parts; External Cover/Internal - Canon PF-701 Service Manual

3
DISASSEMBLY/ASSEMBLY: > LIST OF PARTS: > External Cover/Internal
INTRODUCTION:

Points to Note During Disassembly and Assembly

Be sure to pay attention to the below points in performing disassembly and assembly.
1. In performing disassembly and assembly, for safety precaution be sure to disconnect the
power plug.
2. If there is no special instruction, perform the assembling work in the reverse way of
disassembling procedure.
3. In the places where screws, etc. are used, be sure not to install them wrongly (length/
diameter).
4. To ensure electric conduction, binding screw with washer is used for the mounting screws,
e.g. for earth wire or varistor, etc. Be sure to use this screw in performing assembling-
installing.
5. It is a basic rule that machine is not to be operated when parts is in the removed condition.
6. In disassembling, do not remove the paint-locked screw.
3 DISASSEMBLY/ASSEMBLY: > LIST OF PARTS: > External Cover/Internal

LIST OF PARTS:

External Cover/Internal

[5]
[4]
Key No. Name
[1] Right Cover
[2] Front Cover
[3] Cassette
[4] Left Cover
[5] Rear Cover
[1]
[2]
[3]
F-3-1
Reference
(Refer to page 3-4)
(Refer to page 3-7)
-
(Refer to page 3-6)
(Refer to page 3-7)
T-3-1
3-2
3-2