Cooper Lighting FAIL-SAFE FDI Specification

DESCRIPTION
The Fail-Safe FDI Series combines maximum security construction features
with energy saving technology. This wall mount task/ambient luminaire
utilizes a heavy gauge housing, security lensing and tamper resistant
fasteners to maximize impact resistance and prevent unauthorized fixture
penetration. U.L. listed and C.S.A. certified for damp locations.
The FDI Series provides necessary lighting levels when wall mounted over a
desk or grooming areas in inmate cell applications. Also suitable for use in
public rest areas, dormitories and psychiatric hospitals.
SPECIFICATION FEATURES
A ... Lens
Choice of prismatic acrylic,
prismatic polycarbonate or
prismatic tempered glass on
fixture side, clear polycarbonate or
clear tempered glass on
environmental side.
B ... Fasteners
Stainless steel tamper-resistant
TORX® screws are standard.
Allen-head screws with center
reject pin are optional.
C ... Housing
Die-formed 14 ga. CRS body with
continuous welded and ground
ends to form a one-piece,
C
5 1/4"
[133mm]
MOUNTING DIMENSIONS
9/16" x 1" [14mm x 25mm]
1 1/2"
[38mm] Mounting Hole (6)
1 1/2"
22"
[38mm]
[559mm]
[1245mm]
LAMP CONFIGURATIONS
Specifications and Dimensions subject to change without notice.
C ... Housing Cont.
seamless, housing for maximum
impact resistance and prevention
of unauthorized fixture
penetration. Standard white high
reflectance polyester powder coat
finish. Gloss: 85%; Reflectance:
93%; Hardness: 2H; Salt Spray: 500
Hours.
D ... Lamps
(By Others)
E ... Lens Retention
Lens secured by thru-studs and
vertically adjustable internal CRS
hold-downs.
H E
F G
9"
[229mm]
(3) 7/8" [22mm]
Dia. KO
5 1/4"
[133mm]
22"
[559mm]
49"
1 3/4"
[44mm]
Consult your representative for additional options and finishes.
Catalog #
Project
Comments
Prepared by
F ... Hinge
Continuous, concealed piano hinge
(1/4" diameter knuckle) with
welded pin end to prevent
removal.
G ... Door
One-piece, CRS door frame with
die-formed edges and tightly
closed corners increases rigidity
(gauge to match housing).
H ... Ballast
Standard Class P, CBM/ETL ballast.
Labels
U.L. listed, C.S.A. certified,
standard damp label.
D
A B
(6) 9/16" x 1"
1 1/2" [14mm x 25mm]
[38mm]
Mounting Hole
1 1/2"
13"
[38mm]
[330mm]
19"
[483mm]
25"
[635mm]
2"
[51mm]
TORX ® is a registered trademark
of Camcar Division of Textron Inc.
FAIL-SAFE
MAXIMUM SECURITY
E N E R G Y D AT A
(3) 7/8" [22mm]
Dia. KO
Input Watts:
STD Ballasts & STD Lamps
5 1/4"
(1) 20W T12 Fluorescent: 32W
[133mm]
(2) 20W T12 Fluorescents: 53W
(1) 40W Biaxial Fluorescent: 45W
(2) 40W Biaxial Fluorescents: 82W
ES Ballasts & STD Lamps
(1) 17W T8 Fluorescent: 23W
(2) 17W T8 Fluorescents: 45W
(1) 32W T8 Fluorescents: 37W
(2) 32W T8 Fluorescents: 71W
(1) 40W T12 Fluorescent: 50W
(2) 40W T12 Fluorescents: 86W
ES Ballasts & ES Lamps
(1) 40W T12 Fluorescents: 44W
(2) 40W T12 Fluorescents: 76W
Electronic Ballast Data
Consult Cooper Lighting Representative
03/29/2007 1:18:35 PM
®
Type
Date
FDI
17W - 80W
Fluorescent
TASK/AMBIENT
LUMINAIRE
ADC041578