Parameters Setting Of Lan Driver; Flow Control - NEC N8104-128 Installation Manual

Hide thumbs Also See for N8104-128:

Table of Contents

Available languages

2.4. Parameters Setting of LAN driver

2.4.1.

It is necessary to set the Flow Control parameter of the network adapter matching to the connected

network equipment (switching hub etc.).

Please set Flow Control parameter by the following procedures.

1. Open [Control Panel].

2. Open [Administrative Tools] -> [Computer Management] -> [Device Manager].

3. Open [Device Manager] -> [Network Adapter] -> [Broadcom BCM57711 NetXtreme II 10 GigE

(NDIS VBD Client)] and right click to open the [Properties].

4. Open [Advanced] tab and click [Flow Control] to show [Value].

5. The value can be configures by the down-arrow button.

6. Restart the system.

Check

Server Adapter and link partner must be configured by the same value.

Auto

Disable

Rx & Tx Enabled

Rx Enabled

Tx Enabled

If one port is configured All port correspondence must be set to the same

value by the step 2 to 5.

：：：： Autonegotiation (Default/ Recomended)

：：：： Disabled

：：：： Receive & Transmit Enabled

：：：： Receive Enabled

：：：： Transmit Enabled

- 32 -

April 2011 (3rd Edition)

808-882328-264-C

Table of Contents

Table of Contents