Magnavox VR201BMG Owner's Manual page 19

Use to select the signal that your TV receives.
Use to watch a tape, to watch a program while recording it, or to watch
a TV broadcast using the CHANNEL o/p or Number buttons to
change channels at the VCR. If the VCR/TV light appears on the display
Use to watch TV (changing channels at the TV) or to watch one program
while recording another. Details are on page 26. If the VCR/TV light
doesn't appear on the display panel of the VCR, it is in TV position.
Press to erase incorrect data when programming VCR functions.
Also, press to reset the real-time counter. Details are on page 34.
Press to stop the tape. Press to select an item in the VCR menu.
While recording, press to pause the recording. Press again to
resume recording. Details are on page 25. You can not pause a
One-Touch Recording. During tape playback, press to freeze the
picture. Each press of the PAUSE/STILL button will cause the
noise lines to move on the screen. Press PLAY to resume normal
When playback is stopped, press to fast forward the tape at high
speed. During playback, press to fast forward the tape while the pic-
ture stays on the screen. Details are on page 35. Press to advance to
the next menu or to change the setting of an item in the menu.
Remote Control Buttons (cont'd) 19
EJECT Button
Press to eject the tape.
VCR/TV Button
VCR Position
panel of the VCR, it is in VCR position.
TV Position
CLEAR Button
STOP/p Button
PAUSE/STILL Button
playback. Details are on page 35.
F.FWD(Fast Forward)/B Button
CHANNEL o/p Buttons
Press to change channels at the VCR.
POWER VCR/TV EJECT
1 2 3
4 5 6
CHANNEL
7 8 9
0
SPEED MEMORY
MENU STATUS/EXIT CLEAR
REWIND /PLAY F.FWD
REC/OTR /STOP PAUSE/STILL