Philips VR1010BP Hookup Pages page 11

56 Multi-Channel Television Sound System (cont'd)
To receive and record programs broadcast in second audio, follow steps 1-6. To receive and record a pro-
gram broadcast in stereo, make one of the connections shown, then follow steps 1-6.
If you have a Stereo and a Monitor
TV, use a video cable to connect the
VCR's VIDEO OUT Jack to the TV's
VIDEO IN Jack. Use audio cables to
connect the VCR's AUDIO OUT
Jacks to the Stereo's AUDIO IN
Jacks.
1
Press the VCR button, then press the MENU button.
VCR SET UP
TUNER SET UP
INITIAL SET UP
TAPE MANAGER
SELECT: ,9
CONFIRM: OK
END: MENU
2
Press the PLAY 8 or STOP 9 button to select VCR SET
UP, then press the OK/STATUS button.
DSPC ON
ON SCREEN MODE ON
BLUE BACKGROUND ON
TIMER REC SPEED MANUAL
VIDEO STABILIZER OFF
AUDIO OUT HIFI
NEXT PAGE
SELECT: ,9 CHANGE: -
END: MENU
3
Press the STOP 9 button repeatedly to select NEXT
PAGE. STEREO/SAP will be selected on the second page of
the VCR SET UP menu.
PREVIOUS PAGE
STEREO/SAP STEREO
AUTO DBS
RECORD LINK OFF
S-VHS MODE ON
FRONT A/V INPUT VIDEO
REAR A/V INPUT VIDEO
CHANGE: 3
SELECT: ,9
END: MENU
4
Press the FF - button so that SAP (for a Second Audio
Program) or STEREO appears beside STEREO/SAP.
5
Press the MENU button.
6
Record the program as usual. Details are on page 30.
20917-003
LP
OUT IN VHF/UHF
VIDEO
ANTENNA
IN
(MONO)
L
S VIDEO
CABLE BOX
AUDIO
R
CH3 CH4
TV
OUT
OUT IN
VIDEO
(MONO)
L
AUDIO
R
OUT IN
• If you want to connect the VCR to a
• Make sure the TV and the Stereo (if
• S-VHS MODE, FRONT A/V INPUT
VHF/UHF
ANTENNA
IN
TV
OUT
OR, if you have a single-speaker
TV, use an RF coaxial cable to con-
nect the VCR's TV OUT Jack to the
TV's ANTENNA IN Jack.
Helpful Hints
Stereo TV, follow these steps.
1) Connect the antenna or cable sig-
nal to the VCR's ANTENNA IN jack.
2) Use stereo audio cables to connect
the VCR's AUDIO OUT jacks to the
TV's AUDIO IN jacks.
3) Use a video cable to connect the
VCR's VIDEO OUT jack to the TV's
VIDEO IN jack. (Or, to improve pic-
ture quality, you may connect an S-
Video cable to the S-VIDEO OUT jack
on the VCR and to the S-VIDEO IN
jack on the TV instead. This is avail-
able for VR1010BP only.)
applicable) are in Line Input or
Auxiliary mode. Please refer to your
TV or Stereo owner's manual for
details.
and REAR A/V INPUT will not appear
in the VCR SET UP menu if you have
the VR810BPH.