DeWalt DWE494 Original Instructions Manual
Hide thumbs
Also See for DWE494:
- Original instructions manual (188 pages) ,
- Original instructions manual (113 pages) ,
- Original instructions manual (188 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for DeWalt DWE494
Summary of Contents for DeWalt DWE494
- Page 1 DWE490 DWE492 DWE492S DWE493 DWE494...
- Page 2 English (original instructions) Copyright D WALT...
- Page 3 Fig. A (DWE494) Fig. C Fig. B...
- Page 4 Fig. D Fig. E Fig. G Fig. F...
- Page 5 English LARGE ANGLE GRINDER DWE490, DWE492, DWE492S, DWE493, DWE494 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data...
- Page 6 Denotes risk of electric shock. Denotes risk of fire. Large Angle Grinder General Power Tool Safety Warnings DWE490, DWE492, DWE492S, DWE493, DWE494 WARNING: Read all safety warnings, instructions, WALT declares that these products described under illustrations and specifications provided with this “technical data” are in compliance with: power tool.
- Page 7 English e ) When operating a power tool outdoors, use an d ) Store idle power tools out of the reach of children extension cord suitable for outdoor use. Use of a cord and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Page 8 English FURTHER SAFETY INSTRUCTIONS FOR ALL flanges, the arbour hole of the accessory must fit the locating diameter of the flange. Accessories that do OPERATIONS not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss Causes and Operator Prevention of Kickback of control.
- Page 9 English fragments, accidental contact with wheel and sparks that extending beyond the sanding pad presents a laceration could ignite clothing. hazard and may cause snagging, tearing of the disc or kickback. d ) Wheels must be used only for recommended applications. For example: do not grind with the side Safety Warnings Specific for Wire Brushing of cut-off wheel.
- Page 10 Guard screw Recommended fuse: 13 A. Side handle Using an Extension Cable Lock-on button (DWE494 only) If an extension cable is required, use an approved 3–core Two-pin spanner extension cable suitable for the power input of this tool (see Backing flange Technical Data).The minimum conductor size is 1.5 mm...
- Page 11 English Attaching Side Handle (Fig. B) 11 6. Tighten the threaded clamp nut with the two-pin spanner supplied. WARNING: Before using the tool, check that the handle is 7. Release the spindle lock. tightened securely. 11 8. To remove the disc, loosen the threaded clamp nut with WARNING: The side handle should always be used to the two-pin spanner.
- Page 12 Lock-on Button (Fig. A) Before reconnecting the tool, depress and release the trigger switch to ensure that the tool is off. DWE494 Only WARNING: 8 For continuous operation depress the lock-on button • Ensure all materials to be ground or cut are secured release the on/off trigger switch.
- Page 13 English When cutting profiles and square bar, it is best to start at the chemicals may weaken the materials used in these parts. smallest cross section. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any Rough Grinding part of the tool into a liquid.
- Page 14 English GRINDING AND CUTTING ACCESSORY CHART Guard Type Accessory Description How to Fit Grinder Depressed centre grinding disc TYPE 27 Type 27 guard gUARD Flap wheel Backing flange Type 27 depressed centre wheel Wire wheels Threaded clamp nut Wire wheels with threaded nut Type 27 guard Wire wheel...
- Page 15 English GRINDING AND CUTTING ACCESSORY CHART (CONT.) Guard Type Accessory Description How to Fit Grinder Masonry cutting disc, bonded TYPE 1 Type 1 guard gUARD Metal Backing flange cutting disc, bonded Cutting wheel Diamond cutting Threaded clamp nut wheels TYPE 1 gUARD TYPE 27 gUARD...
- Page 16 Belgique et www.dewalt.be WALT - Belgium BVBA Tel: NL 32 15 47 37 63 luxembourg België en luxemburg enduser.BE@sBDinc.com Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 2800 Mechelen Fax: 32 15 47 37 99 Danmark www.dewalt.dk WALT (Stanley Black&Decker AS)