Siemens RUGGEDCOM RX1500 Installation Manual page 39

RUGGEDCOM RX1500
Installation Guide
1
2
3
Figure 19: Installing a Power Module
1. Chassis 2. Power Module 3. Screws
5. Hand-tighten the screws to secure the power module to the chassis.
6. Turn on power to the module and confirm the module is receiving and supplying power. This is indicated by
the LEDs on the module.
LED
O
I
Installing/Removing Power Modules
State
Green The module is supplying power
Green The module is receiving power
Description
Chapter 3
Modules
31