Operation - Makita XLS01X Instruction Manual

OPERATION

CAUTION:
Only use Makita genuine pads for
sanding (optional accessories).
CAUTION:
Make sure the work material is
secured and stable. Falling object may cause
personal injury.
CAUTION:
Hold the tool firmly with one hand
on the switch handle and the other hand on the
front grip when operating the tool.
CAUTION:
Do not run the tool at high load
over an extended time period. It may result in tool
malfunction which causes electric shock, fire and/or
serious injury.
CAUTION:
Be careful not to touch the rotating
part.
NOTICE:
Never force the tool. Excessive pressure
may lead to decreased sanding efficiency, damaged
pad, or shorten tool life.
NOTICE:
Continuous operation at high speed
may damage work surface.
1. Position the tool lightly against the work surface.
Apply light pressure enough to align the sanding head
with the work surface.
2. Apply additional pressure to engage the pad
on the work surface. Move the tool in an overlapping
pattern in constant motion to smooth the drywall
compound.
Operating the tool with the
extension handle
Optional accessory
CAUTION:
Hold the tool firmly with one hand
on the switch handle and the other hand on the
extension handle when operating the tool with the
extension handle.
CAUTION:
Take extra care for the footing and
balance when handling the tool with the extension
handle.
1. Wear the belt for the extension handle as shown in
the figure.
► 1. Belt
2.
Attach the holder to the belt.
1
► 1. Holder 2. Belt
11 ENGLISH
1
2