Enter A Pause; Delete An Entry; List Entry; Delete All Entries - Motorola TD1 Manual

4.5

Enter a pause

If your TD1 is connected to a switchboard, you may need to enter a pause in a stored
number. This gives the switchboard time to get an outside line. A pause is normally stored
after the switchboard access code (e.g. 9). You can also add a pause when dialling a
number manually.
1. When storing or dialling a number, press and hold
then continue storing/dialling the phone number.
4.6 Edit an entry
d
1. Press .
u d
2. Scroll or to the entry you want to edit and press
again.
3. Edit the name and press
4. Edit the number. Press
5. If you want to add the number to the VIP list press
b
VIP list press
e
6. Press to return to standby.
4.7

Delete an entry

d
1. Press .
2. Scroll to the entry you want to delete and press
d
3. Scroll to Delete
4. Display shows Confirm?. Press
e
5. Press to return to standby.
4.8

List entry

You can also view, edit and delete an entry through the phonebook menu.
M
1. Press twice to open the phonebook menu.
2. List Entry is displayed, press
3. You can now follow the instructions in sections 4.1.1, 4.6 and 4.7 from step 2.
4.9

Delete all entries

M
1. Press twice.
d
2. Scroll to Delete All
3. Display shows Confirm?. Press
e
4. Press to return to standby.
22
M
to confirm. Use
M
to confirm. Use
. The number is saved.
M
and press .
M
.
M
.
M
and press .
M
.
d
until the display shows
M
. Edit
b
to delete characters.
b
to delete digits.
M
, if you don't want to store to the
M
.
P. You can
M
is displayed. Press
Phonebook