Panasonic KX-TGF882 Quick Manual page 5

Link to cell
Handset: Link to cell display items
− A cellular line is in use.
td
L When flashing slowly: The cellular call is on hold.
L When flashing rapidly: A cellular call is being received.
− The remote voice assist feature is in use.
*1 Corresponding lines (1, 2: cellular line) are indicated next to the item.
A cellular phone is connected.
xd
L When turned off: A cellular phone is not connected to the base unit.
*1 Corresponding lines (1, 2: cellular line) are indicated next to the item.
− A cellular call is in progress on that line.
uv
− The cellular line is selected for the setting.
Base unit: Link to cell display items
− A cellular line is in use.
d
L When flashing slowly: The cellular call is on hold.
L When flashing rapidly: A cellular call is being received.
− The remote voice assist feature is in use.
*1 Corresponding lines (1, 2: cellular line) are indicated next to the item.
− A cellular call is in progress on that line.
uv
− The cellular line is selected for the setting.
A Bluetooth headset is connected to the base unit. It is ready for use.
A Bluetooth headset is in use.
Connecting/disconnecting the cellular phone (Handset/Base unit)
Auto connection to the Bluetooth devices (cellular phones)
The unit connects to the Bluetooth devices at regular intervals if the connection is lost. To change the
interval (default: "1 min"), see the operating instructions.
L Only 1 Bluetooth device can be used with the unit at a time, and the base unit loses its connection from
other Bluetooth devices. To automatically resume the connection to Bluetooth devices, leave the auto
connection on.
Connecting/disconnecting the cellular phone manually
If you will not be using the paired cellular phone's link to cell feature temporarily (for example, you do not
want the unit to ring when your cellular line receives a call), you can disconnect your cellular phone from the
base unit. If you want to use it again, reconnect the cellular phone to the base unit.
L After you disconnect a paired cellular phone from the base unit manually, it will automatically be
connected to the base unit in 30 minutes. If you do not use the link to cell feature anymore, unpair the
cellular phone.
L A disconnected cellular phone is not unpaired from the base unit, so pairing it to the base unit again is
unnecessary.
1
To connect/disconnect:
For CELL 1: {MENU}(6251
For CELL 2: {MENU}(6252
L A long beep sounds.
2
Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {EXIT}
*1
*1
*1
Ready to make/receive cellular calls.
*1
*1
– 5 –