Advertisement
NAV E 511 • Setup Guide (Continued)
1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1
HTML Page
Figure 5.
NOTE:
Detailed descriptions of communication, configuration, and monitoring are provided in the NAV E 511 User Guide,
available at www.extron.com.
Connection settings
View and change connection settings as follows:
On the home page, click Settings (see figure 5,
1.
Click the Network Connection drop-down list (
2.
Connection pane opens (see figure 6), showing protected views of the
network connection settings.
NOTE:
Editing of connection settings is disabled when the device is
assigned to an Extron NAVigator System Manager.
To change the settings, click Edit (see figure 6,
3.
changes to Save.
Click in the desired field (
4.
Repeat step 4 as necessary for other values.
5.
Click Save.
6.
Pairing devices via front panel
Pair devices as follows:
Use a Tweeker or other small screwdriver to press
1.
and hold the encoder front panel ID button for
approximately 3 seconds, until the ID LED blinks. The
encoder enters pairing mode, which allows decoders to
receive the AV and USB streams from encoders.
One at a time, use a Tweeker or other small screwdriver to press and hold
2.
the decoder front panel ID button for approximately 3 seconds, until the ID
LED blinks three times. The decoder is now paired to the encoder.
1
) > Networking.
2
). The Network
1
). The Edit button
2
) and edit it as necessary.
ID
A
A
A
A
A
AV E 511
Network Connection Pane
Figure 6.
2 2 2 2 2 2 2 2
2 2 2 2
2 2 2 2 2 2
2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1
5
Advertisement
