Advertisement
zDetailed operation of level offset adjustment mode
Auto adjustment mode
[Auto display]
Display as auto when in the auto adjustment mode.
Auto :
[S-meter display]
Display the current S-meter value. value (Hex)
[ ]
S-xx
*Press this key hold
[Level offset display]
to switch the display
Show the current level offset display. value (Hex)
L-xx
[Image of display]
A u t o : S - x x _ L - x x
[MENU]
Cancels Level Offset Adjustment mode (to normal screen)
*Press this
key briefly
*Frequency returns to the previous value after exiting the Adjustment mode.
zDetailed operation of auto level offset adjustment mode
Starts Auto Adjustment mode
[Image of display]
A u t o : S - x x _ L - x x
[Image of adjustment Complete (Successful) display]
[Audio]
*Press this
A u t o : S - x x _ L - x x
key briefly
A d j u s t O K
[Image of Adjustment Complete (Failed) display]
A u t o : S - x x _ L - x x
A d j u s t N G
[MENU]
Cancels Level Offset Adjustment mode (to normal screen)
*Press this
key briefly
*If the Level Offset value is not adjusted (0xFF or 0x00), display as "--".
*Red character changes while adjustment is in progress
*Writes 0xFF if adjustment failed
(No.WA020<Rev.001>)18/24
Advertisement
