Table of Contents
Advertisement
Normally set Frequency,
●
is not displayed or if necessary, enter each value specified by your
cable provider with
After settings, select
●
3. A confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
DVB-via-IP
Ensure the network connections and network settings are completed.
●
Functions > DVB-via-IP > DVB-via-IP client connection
Network > Network settings
1. Select
Auto Setup
2. A confirmation screen is displayed and press
3. Select a server from
4. Select
Client Settings
Select
Unicast Environment
●
Select
Multicast Environment
●
hospital, etc. (All servers are selected automatically.)
5. Select
Search Channels
6. Set
DVB-via-IP Search Mode
Set DVB-via-IP configuration to tune DVB channels.
●
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Set
Auto Setup
with following control panel buttons.
Move the cursor / select from a range of options / select the menu item
●
Access the menu / store settings after adjustments have been made or
●
options have been set with INPUT/OK/HOLD for MENU button
Symbol Rate
Numeric
buttons.
Start scan
and press
and press
OK
to access.
Server
List.
and press
OK
to access.
to use in a home network.
to use in multi family housing units, hotel,
and press
OK
and select
- 116 -
and
Network ID
to Auto. If
OK
to search.
OK
to start
Auto
OK
to access.
to access.
Start Auto
Setup.
Auto
Setup.
Advertisement
Table of Contents
