Table of Contents
Advertisement
2) Set
Satellite
for the selected LNB.
– Select
No Satellite
(Available satellite is searched in
– Select
User defined
– If you set to
SingleCable
(depending on the Single Cable router you use). For details, read
the manual of the Single Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press
BACK/RETURN
6. Select
Auto Setup
7. Select
Search Mode
8. Set the item and press
Scan Mode
●
Quick:
Scans the suitable frequency for the selected satellite.
Full:
Scans the whole frequency range.
After settings, select
●
9. A confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
= Note =
Set
Dual Tuner Mode
●
function.
(Only for dual tuner model)
■
DVB-C, DVB-T, Analogue
1. Select
Auto Setup
2. Set
DVB-C Auto Setup Settings
Scan Mode
●
Quick:
Scans the suitable frequency in your country.
Full:
Scans the whole frequency range.
if you do not know the connected satellite.
to set
Test Transponder Frequency
Single
Cable, additional settings are required. Set
Version,
User
Band,
to store.
and press
OK
to access.
/
Scan Mode
and press
OK
to store.
Start scan
and press
to
On
to select DVB-S signal for DVB-via-IP server
and press
OK
to access.
and press
- 115 -
Auto
Setup.)
User Band Frequency
OK
to access.
OK
to search.
OK
to start
Auto
OK
to store. (DVB-C)
manually.
and
PIN
Setup.
Advertisement
Table of Contents
