Jabra SPEAK2 55 User Manual page 27

6.7 Auto-reconnect
When Auto-reconnect is enabled (default), the
speakerphone will automatically connect to a
previously paired Bluetooth device.
If the speakerphone is used in a meeting room
or by several people, it is recommended to
disable auto-reconnect to avoid unintentional
connections. If Auto-reconnect is disabled, the
speakerphone will only allow one Bluetooth
connection at a time and all previously paired
Bluetooth devices will be unpaired and need to
be paired with the speakerphone again.
Auto-reconnect can be configured in Jabra
Direct.
To pair a device with the speakerphone, hold (3
sec) the Bluetooth button on the speakerphone
and follow the voice-guided instructions.
27