Advertisement
Advertisement
Table of Contents
Related Manuals for Jabra Speak 710
Summary of Contents for Jabra Speak 710
- Page 1 Jabra Speak 710 User manual...
- Page 2 ® © 2017 GN Audio A /S. All rights reserved. Jabra is a ® trademark of GN Audio A/S. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.
- Page 3 5.2 Connect To Pc (Usb Cable) 5.3 Connect To Smartphone 6. How To Use ........ 15 6.1 Button Visibility 6.2 Typical Use 6.3 Multiple Call Handling 6.4 Link Button 6.5 Smart Button 6.6 Voice Guidance 6.7 Shared Use 6.8 Factory Reset Jabra Speak 710...
-
Page 4: Table Of Contents
7. Software ........22 7.1 Jabra Direct 7.2 Update Firmware 8. Support ........24 8.1 Faq And Technical Specifications 8.2 How To Care For Your Jabra Device Jabra Speak 710... - Page 5 1. Welcome Thank you for using the Jabra Speak 710. We hope you will enjoy it! Jabra Speak 710 features • Immersive sound for calls and music • Intuitive plug and play connectivity - connect to laptop, smartphone and tablet via USB or Bluetooth ®...
- Page 6 2. Overview Mute Bluetooth Battery status Volume Volume up down Link button Smart button Answer call Power on/off End call jabra USB cable Table stand Jabra Link 370 Jabra Speak 710...
- Page 7 3. Where to position 3.1 Small meeting room Position the speakerphone in the center of the table, up to 2m/6ft from each participant. A single Jabra Speak 710 is ideal for up to 6 people. 2m/6ft Jabra Speak 710...
- Page 8 3.2 Large meeting room For large meetings of up to 12 people in a single room, position two Jabra Speak 710’s at either end of the table to ensure all participants in the meeting be heard clearly. 2m/6ft To temporarily link the audio between two Jabra Speak 710’s, press the Link button on...
- Page 9 3.3 Desk When using the Jabra Speak 710 at your desk it is recommended to put the speakerphone into an upright position using the table stand. This will better direct the audio towards you. Jabra Speak 710...
- Page 10 Jabra Speak 710’s can be positioned on either side of a projector or display for automatic stereo sound. To temporarily link the audio between two Jabra Speak 710’s, press the Link button on both speakerphones when they are within 2m/6ft. max 2 m/6 ft...
-
Page 11: Usb Charging
4.1 USB charging Plug the Jabra Speak 710 into a USB power source using the attached USB cable. The Jabra Speak 710 battery lasts for up to 15 hours of talk time and takes approx. 3 hours to fully charge. -
Page 12: Battery Status
4.3 Battery status To view the current battery status, press the Battery status button. The LEDs around the edge of the Jabra Speak 710 will light up to indicate the current battery status. Medium battery Low battery Jabra Speak 710... - Page 13 5. How to connect 5.1 Connect to PC (Bluetooth) Plug the Jabra Link 370 into a USB port on your PC. The Jabra Speak 710 and the Jabra Link 370 are pre-paired and ready to use out of the box.
- Page 14 5.2 Connect to PC (USB cable) Plug the Jabra Speak 710 into a USB port on your PC. You may need to set the Jabra Speak 710 as the playback device in your operating system’s audio settings. jabra 5.3 Connect to smartphone...
- Page 15 The Smart button, Link button, and Mute button will only be visible under certain conditions (e.g. the Link button is only visible when the Jabra Speak 710 is in close promixity to another Jabra Speak 710). Jabra Speak 710...
- Page 16 Volume up/ Press (or hold) the Volume down up or Volume down button Mute/unmute Press the Mute button microphone Press the Battery status Battery status button Connect Press the Bluetooth status Bluetooth button device Jabra Speak 710...
-
Page 17: Multiple Call Handling
WHAT Press the Link button (only Link two Jabra visible when within 2m/6ft Speak 710’s range of another Jabra Speak 710) Press the Smart button (only Voice assistant visible when connected to a (Smartphones) smartphone) Press the Smart button (use... - Page 18 To unlink the speakerphones, press the Link button on one of the speakerphones. NOTE If two bluetooth devices are connected to the Jabra Speak 710, the last connected Bluetooth device will be replaced by the temporary link. Jabra Speak 710...
-
Page 19: Voice Guidance
Now™, Cortana™). However, if you would prefer the Smart button to instead speed dial a phone number on your Smartphone or PC, this can be configured using Jabra Direct. jabra 6.6 Voice guidance The voice guidance can be turned on or off by holding the End call button for 8 seconds. - Page 20 6.7 Shared use If the Jabra Speak 710 is to be shared by many users, it is recommended to enable Shared use in Jabra Direct. When Shared use is enabled, the speakerphone will not automatically connect to a previously connected Smartphone or Jabra Link 370.
-
Page 21: Factory Reset
6.8 Factory reset Resetting the Jabra Speak 710 clears the list of paired Bluetooth devices and also clears all personalized settings. After a factory reset, it is necessary to re-pair the Jabra Speak 710 to your Bluetooth devices or Jabra Link 370. -
Page 22: Software
7. Software 7.1 Jabra Direct Jabra Direct is PC software designed to support, manage enable optimal functionality for Jabra devices. Download the latest version from jabra.com/direct Jabra Speak 710... -
Page 23: Update Firmware
7.2 Update firmware Firmware updates improve performance or add new functionality to Jabra devices. 1. Connect the Jabra Speak 710 to a PC using the USB cable or Jabra Link 370. 2. Install Jabra Direct on your PC. 3. Use Jabra Direct to check for the latest firmware updates. -
Page 24: Support
• The Jabra Speak 710 is for indoor use only. • Avoid storage at extreme temperatures (above 65°C/149°F or below -40°C/-40°F). • Do not expose the Jabra Speak 710 to rain or other liquids. • Do not cover the Jabra Speak 710 with stickers or labels. - Page 25 Jabra Speak 710...