Table of Contents
Advertisement
When installing an external option, see Chapter 3 "Product overview" on page 29 to identify the required
connector. Then, use the instructions that come with the option to help you make the connection and install
any required software or device drivers.
Power cord
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Before you remove the power cord, turn off the computer and wait several minutes until the computer is cool.
Note: Do not remove the power cord when the computer is connected to ac power. Otherwise, there might
be a risk of short circuits.
Removal steps
1. Turn off the computer and remove all connected devices and cables.
2. Remove the power cord.
Chassis rubber feet
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
48
IdeaCentre 5i (14L, 8) Hardware Maintenance Manual
Advertisement
Table of Contents
