Table of Contents
Advertisement
5
Pre-Tech Support Checklist
NOTE
• This product has a built-in battery pack. After purchasing your PC, be sure to
charge the battery pack completely before using it for the first time.
- The battery is a wearable good and thus the battery may not last as long as
before after the battery has been used for a long time.
- The internal battery cannot arbitrarily be removed or replaced. Removing it may
void the warranty.
- If you need to remove or replace the battery, visit a designated service center.
- We charge a fee for removing or replacing the battery.
Pre-Tech Support Checklist
Troubleshooting
If the following symptoms appear while using the product, check again.
It may not be a malfunction.
Symptom
Some of the
• Depending on the product, some of the Windows
Windows functions
functions may not be supported, and you may
do not work
need to purchase a separate hardware, driver, or
normally or are not
software to use the functions. Also, you may need
supported.
to update the BIOS additionally. The Auto Update
function of Windows is always activated. Updating
Windows may incur Internet usage fees as well as
additional system requirements for the storage
device or the hardware. For more information, refer
to the website https://www.microsoft.com.
Cause and Solution
Symptom
Part of LG Software
• The UWP app provided by LG Electronics can be
is not installed.
installed only through the Microsoft Store. Access
Microsoft Store and search for the app to install it.
For more information on the app, refer to
LG Easy Guide of the LG PC Manuals.
The screen color
• Check if Reader Mode is on. When the Reader mode
does not display
is on, turn the setting off.
properly.
- Press the Start button [
[LG Smart Assistant] > [Display Setting] > [Reader
Mode] settings off.
• Using the Reader mode and the Night mode at
the same time can cause color distortion. Turn the
Reader mode settings off or change the Night mode
to [Off].
- Turning off Night light: Press the Start button
[
] and select Settings [
[Display] > [Night light] > [Off].
• If the screen still does not properly display, contact
the LG Electronics service center.
- Reader mode controls the brightness and color
of the LCD screen to look like printed paper and
protect the user from eyestrain.
The power does not
• Check if the power cord is connected.
turn on.
• After disconnecting the power cord and
reconnecting it, press the power button of the
product.
• If the power is not on after reconnecting the power
cord, remove the adapter and hold the power
button for at least 6 seconds to reset the system.
Once the system is reset, press the power button
again to turn on the computer.
Cause and Solution
] to turn the [All apps] >
] > [System] >
Advertisement
Table of Contents
