Table of Contents
Advertisement
Installation instructions
Setup
•
The recess and connection dimensions are included in the separate installation instructions.
Check that all dimensions are correct before starting the installation. Note that the height of the
integrated door panel can be adjusted to match other fittings.
•
The electrical and
water supplies should
enter through the
area indicated by the
shading on the
illustration.
*
24'' (609 mm) with the
trim kit.
•
Make sure the area on which the dishwasher is to be installed is firm. Adjust the adjustable feet
so that the dishwasher is level. Tighten the lock nuts.
•
If the dishwasher is built-in, the surrounding furnishings must be resistant to any condensation
from the dishwasher.
•
Mount the protective film beneath the countertop and up around the edge. The function of the
protective film is to protect the countertop from moisture. (The protective film is in the enclosed
plastic bag.)
•
Check that the machine is installed such that the door opens freely, otherwise door lock
functionality may be disrupted.
•
Note that the door springs may need adjusting after a cover door has been fitted. Adjust the left
and right door springs equally until the door is evenly balanced.
NOTE!
Framed cabinets require additional finished filler material behind the face frame for a proper
installation. A minimum 3½" (89 mm) finished return is required on all sides of the opening.
Drain connection
This dishwasher is suitable for installing in a raised recess (to attain an ergonomic working height).
This means that the dishwasher can be placed so that the drain hose runs to a lower level than the
bottom of the dishwasher, such as by routing it directly to a floor drain. The dishwasher is fitted with
an integrated anti-siphon device to prevent the machine from being emptied of water during the
wash cycle.
44
Filler
Frameless
cabinetry
Inches (mm)
Framed
cabinetry
Advertisement
Table of Contents
