Aluminum Wheel Precautions - Toyota Land Cruiser 2006 Owner's Manual

Hide thumbs Also See for Land Cruiser 2006:
Table of Contents

Advertisement

Replacement with used wheels is not rec-
ommended as they may have been sub-
jected to rough treatment or high mileage
and could fail without warning. Also, bent
wheels which have been straightened may
have
structural
damage
and
should not be used. Never use an inner
tube in a leaking wheel which is designed
for a tubeless tire.
CAUTION
Observe
the
following
instructions.
Otherwise, an accident may occur re-
sulting in death or serious injuries.
D
Do not use wheels other than the
manufacturer's recommended size,
as this may cause dangerous han-
dling
characteristics
resulting
loss of control.
D
Do
not
use
wheels
of
brands, sizes and types, as this
may
cause
dangerous
characteristics resulting in loss of
control.
338

Aluminum wheel precautions

D
When
installing
check that the wheel nuts are tight
after driving your vehicle the first 1600
km (1000 miles).
D
If
you
have
therefore
changed your
wheel nuts are still tight after driving
1600 km (1000 miles).
D
When using tire chains, be careful not
to damage the aluminum wheels.
D
Use
only
Toyota
wrench designed for
wheels.
D
When balancing your wheels, use only
Toyota balance weights or equivalent
and a plastic or rubber hammer.
D
As with any wheel, periodically check
in
your aluminum wheels for damage. If
damaged, replace immediately.
different
handling
aluminum
wheels,
rotated,
repaired,
or
tires, check
that the
wheel
nuts
and
your aluminum

Advertisement

Table of Contents
loading

Table of Contents