Scan Properties - SATO Argox AI-6800 User Manual

AI-6800
User Guide

3.2 Scan properties

￭
Good-read off After you pull the trigger, your
scanner will keep emitting the light bar, until it
captures a good scan or no bar code is decoded
after the stand-by duration elapsed.
￭
Momentary When you pull the trigger, the
light bar is turned on; when you release the
trigger, the light bar is turned off.
￭
Alternate The trigger acts as a toggle. When
you pull the trigger, the light bar is turned on;
when you pull it again, the light bar is turned off.
￭
Timeout-off When you pull the trigger, the
light bar is turned on. If no bar code is decoded
after the stand-by duration elapsed, the light bar
is turned off.
￭
Continue It automatically detects and decodes
bar codes in your scanner's field of view. You can
turn on this mode when you want to decode bar
codes without pulling the trigger. If no bar code
is decoded after the stand-by duration elapsed,
the light bar will flash. You can move your
scanner or pull the trigger to wake it up.
￭
Test only It is reserved for engineers to test.
￭
Auto-sensing Similar to Continue, it
automatically detects and decodes bar codes in
your scanner's field of view. If no bar code is
decoded after the stand-by duration elapsed,
the light bar will be turned off. You can move
your scanner or pull the trigger to wake it up.
19