Table of Contents
Advertisement
Menu operation (continued)
FEATURE menu (continued)
ITEM
SETTING
LAMP 1 TIME RESET OK
LAMP 2 TIME RESET OK
FILTER TIME RESET
OK
RESET ALL
OK
• CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.
• When SCART INPUT is set to ON, normal computer signals aren't projected.
• Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped
with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren't compatible with this projector.
• The RESET ALL process may take some time to complete.
• You cannot carry out RESET ALL for approx. 2 minutes after the lamp switching or the lamp relay operation.
All manuals and user guides at all-guides.com
FUNCTION
The LAMP 1 operation time is reset to 0.
The LAMP 2 operation time is reset to 0.
The filter operation time is reset to 0.
The menu settings are reset to the factory defaults (except the
LANGUAGE, PASSWORD FUNCTION, IMAGE CAPTURE, SCREEN,
and NETWORK settings).
EN-38
Advertisement
Table of Contents
