Table of Contents
Advertisement
Viewing computer images (continued)
Setting the screen size
Change the setting of the SCREEN according to the type of the screen to be used.
(See page 31 for menu setting.)
1. Display the INSTALLATION 2 menu.
2. Select SCREEN by pressing the or button.
3. Select your desired aspect ratio by pressing the or button.
• You can select the aspect ratio from 16:9, and 4:3.
To cancel the menu:
4. Press the MENU button.
Setting the aspect ratio
You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the
setting according to the type of the input video signal.
How to change the settings:
With the remote control:
1. Press the ASPECT button.
• Every time the ASPECT button is pressed, the aspect mode changes from NORMAL to 16:9, to FULL, to
USER, and back to NORMAL.
- NORMAL:
Select to change the aspect ratio automatically depending on the input signal. (Select this option for
normal use.)
- 16:9:
Select to expand squeezed (or horizontally compressed) images such as DVD images to 16:9.
- FULL:
Select to project images in full size (1024 x 768 pixels) irrespective of type of input signal.
- USER:
Select to adjust the detailed settings.
With the SIGNAL menu:
(See page 31 for menu setting.)
1. Display the SIGNAL menu.
2. Select ASPECT by pressing the or button.
3. Select your desired aspect ratio by pressing the or button.
When 16:9
is selected with the SIGNAL menu, you can make further setting
using the following procedures.
4. Press the ENTER button.
5. Select the POSITION setting by pressing the or button.
• POSITION:
You can select the image display position within the screen from
UPPER, CENTER, and LOWER.
To cancel the menu:
6. Press the MENU button.
Important:
• When a 16:9 image is kept displayed for a long time before displaying FULL image, the afterimages of the black
bars may appear on the FULL image screen. Consult your dealer in this case.
All manuals and user guides at all-guides.com
EN-29
opt.
1
1
2
2
INSTALLATION 2
AUTO POWER ON
AUTO POWER OFF
SCREEN
IMAGE CAPTURE
SPLASH SCREEN
ON
BACK COLOR
DVI LONG CABLE
REMOTE 1 MODE
ENTER
FILTER MENU
ENTER
SIGNAL
MEMORY CALL
A
U
ASPECT
opt.
1
1
2
2
SIGNAL
ASPECT – 16:9
POSITION
OFF
5min
4:3
SETUP
ON
BLUE
AUTO
AUTO
NORMAL
CENTER
Advertisement
Table of Contents
