Checking And Lubricating The Cables; Checking And Lubricating The Front And Rear Brake Levers - Yamaha KODIAK 700 Owner's Manual

1. Rear brake light switch adjusting nut
2. Rear brake light switch
EBU24905

Checking and lubricating the cables

8
The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.
Recommended lubricant:
Yamaha cable lubricant or other suitable
cable lubricant
EWB02582
1
 Inspect cables frequently and replace if
(b)
damaged. Corrosion can result when the ca-
ble sheaths become damaged, and cables
2
can also become frayed or kinked, which
could restrict the operation of controls and
(a)
lead to an accident or injury.
 Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or
do not work smoothly, you could be unable
to control the ATV, which could lead to an
accident or collision.
EBU28712
Checking and lubricating the front and
rear brake levers
The operation of the front and rear brake levers
should be checked before each ride, and the lever
pivots should be lubricated if necessary.
8-49
WARNING