Lenovo N24 Hardware Maintenance Manual page 54

Lenovo N24 Hardware Maintenance Manual
Figure 12. Removal steps of camera board, sensor board and LCD cable
(continued)
Unplug the connector in the direction shown by arrow 3. Remove the screw 4.
Remove the sensor board 5.
Peel off the tap 6. Unplug the touch panel connector in the direction shown by
arrow 7. Lift the EDP cable latch in the direction shown by arrow 8. Unplug the
EDP cable in the direction shown by arrow 9.
50
Step Screw (quantity)
M2 × 2 mm, Phillips head, nylok-coated (1)
4
Sensor board to LCD
7
3
4
5
6
9
8
Color Torque
Silver 3±0.3 kgf*cm