Lenovo N24 Hardware Maintenance Manual
1050 Touchpad button board
For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
Figure 5. Removal steps of touchpad button board
Peel off the tape 1.
Detach the touchpad button board connector in the directions shown by arrows
2 and 3. Remove the screw 4. Then remove the touchpad button board in
the directions shown by arrow 5.
38
Step
Screw (quantity)
M2.5 X 3 mm, Phillips head, nylok-coated (2)
4
Touch pad module to upper
1
4
5
4
2
3
Color
Torque
Black
2 kgf*cm