Charger Port
The JUSB6 connector is a charger port which can increase USB power output for fast
charging your smartphone or USB-powered devices. The Charger Port is hardware
controlled by motherboard chip, it can still charge your device in suspend, hibernate
state or even shutdown states. However, when you boot the computer into Windows
you will need to install the MSI
Charging mode.
Watch the video to learn how to charge the smartphone with Super-
Charger.
http://youtu.be/FCyvjr5NbOw
Important
When the Charging mode is enabled, the Charger Port data syncing will be disabled.
T_SEN1~3: Thermal Sensor Connectors
These connectors allow you to connect the thermistor cable and use it to monitor the
temperature of the detection point.
SUPER CHARGER application to turn ON/OFF the
®
Video Demonstration
Sense
Thermistor cable
GND
,
®
Overview of Components
31