Settings - Samsung DW80BB70 Series User Manual

Settings

You can change the sound, Auto Release™ Dry alert, Rinse aid amount, and Auto Release™
Dry settings to your preference. To change the settings, press the Sanitize and Delay Start
buttons simultaneously for 3 seconds. Press Sanitize to navigate through the sub menus,
and then press Delay Start to confirm your changes.
Auto Release™ Auto Release™
Sound Rinse aid amount
Dry alert Dry
U1/U0 F1~F6
J1/J0 A1/A0
Sound
Press Sanitize until 'U1' or 'U0' is displayed. To mute the dishwasher, select 'U0', and then
press Delay Start. To unmute, select 'U1', and then press Delay Start.
Auto Release™ Dry alert
You can enable or disable the setting that alerts you when the door opens to start the Auto
Release™ Dry function.
Press Sanitize until 'J1' or 'J0' is displayed. To disable the Auto Release™ alert, select 'J0',
and then press Delay Start. To enable, select 'J1', and then press Delay Start.
Rinse aid amount
Press Sanitize until 'F1~F6' is displayed. The higher the number, the more rinse aid the
dishwasher uses. To improve drying performance, select a higher number.
If your dishes appear discolored after a wash, switch to a lower number.
The factory default level is 'F4'.
English 35
DW7000B_DW80B7070_AA_DD68-00243A-01_EN_FULL.indd 35 2023-04-26 12:24:23