Panasonic KX-NS300 Installation Manual page 162

5.3 Starting Web Maintenance Console
Supported Item
[xxx] : PT Programming Number
[302]TRS—COS 2 Denied Code
[300]Carrier Exception Code
[309]Emergency Number
*1 This setting is programmed by Personal Programming.
Note
Review the settings of feature numbers of converted data.
Example: Idle Line Access (Local Access) settings
KX-TVM System Prompt and Mailbox Data Import
Voice data recorded by users in a KX-TVM series VPS can be converted and used as voice data in the
KX-NS300 Unified Messaging system. System prompts, mailbox prompts, and mailbox messages can be
converted.
Condition:
•
The required software versions are as follows:
–
KX-TVM series: version 1.0 or later
Notice
•
Only data recorded by users can be imported; the preinstalled guidance data will not be imported.
•
The language set for the KX-TVM series VPS must be set as the language for the Unified Message
system where the voice data will be imported. If the language is different, the data cannot be imported.
•
The following content of KX-TVM mailbox's audio data is not restored as the Unified Messaging system
Mailbox data.
–
Receive message: Mailbox number of Recorder
–
Transfer message: Mailbox number of Recorder/Sender
–
Confirmation of hearing a message: Mailbox number of the responder
In this case, the message is treated as if it were recorded by a non-subscriber.
–
Mailbox number of Recorder/Sender/Responder is not announced in restored audio data.
–
When IMAP integration is used, "Unknown Caller" is shown in the "From" field.
1.
Connect a PC to the KX-TVM series VPS, and then start the KX-TVM Maintenance Console.
For details about connecting a PC to the VPS or about the Maintenance Console, refer to the appropriate
documentation.
2.
In Maintenance Console, back up the voice data on the KX-TVM series VPS to the PC.
For details about backing up KX-TVM VPS voice data, refer to the documentation of the corresponding
VPS.
3.
Start the KX-NS300, and then start Web Maintenance Console.
4. Navigate to Maintenance ® Tool ® 10. UM data restore, and then select the types of voice data you want
to restore (i.e., import). You can select the following types of data:
a.
System prompts
•
For batch restore
Under System Prompts, select the System Prompts check box.
Condition:
The Unified Messaging system has only 8 system prompts, which is less than the number on
KX-TVM VPSs. If you restore system prompts, Prompt 9 and Prompt 10 on the KX-TVM VPS will
not be restored. To import Prompt 9 and Prompt 10 to the Unified Messaging system, they must
be restored individually.
162 Installation Manual
Converted Item
[x.x.x] : PC Programming-System Menu
Number
[7.1] Denied Code
[8.5]Carrier - Carrier Access Code
[7.4]Emergency Dial