One for All Essence 6 Device Manual page 7

Available languages

If the brand of your device is not listed in the SimpleSet

feature, you can set up by trying codes individually. To do

this, firstly locate your brand in the Code List. Codes are listed

by brand and device, and in order of popularity.

* Note: If your original remote did not have a Power key,

try testing with a different key at step 6. For example try

pressing Play or Pause when setting up a streaming box and

see if the box responds.

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 7

SETUP

SETUP BY CODE

Turn on your device (not on standby) and point the

Essence remote towards it.

Press the Device key you wish to set up

(for example TV)

Hold down the SETUP key until the LED

under the Device key blinks twice

Enter the first 4 digit code listed for your

brand (e.g. 1840 for LG).

The LED will blink twice on the last digit of the code.

Now aim the remote towards your device

and press the POWER key.*

If the device turns off your remote is ready to use. If

not, repeat steps 2-6 with the next code in the list.

01-12-2022 16:21

Table of Contents

Urc2160